Have feedback on the new Karl.gg? Tell us what’s working, what’s getting in your way, or what you’d like to see improved on Discord. Please keep loadout posts focused on builds so players can find them easily. Share feedback on Discord

This build may be outdated.

It was made in an earlier patch, so some upgrades may perform differently today.

Driller loadout · Season 1

Flow Rate Expansion - What is it good for?

by T-Ram · Updated 20 Mar 2022

Primary
Cryo Cannon
Secondary
—
Throwable
—
Use this build Salutes · 13

The kit

Weapons & gear

Primary · Heavy Weapon

Cryo Cannon

  1. T1 · B Faster Turbine Spinup -0.4 sec Chargeup Time
  2. T2 · C Bypassed Integrity Check -1 sec Repressurization Delay
  3. T3 · A Improved Pump x1.75 Pressure Gain Rate
  4. T4 · C Larger Reserve Tank +150 Tank Size
  5. T5 · B Cold Radiance Cool down enemies within 4m of you at a rate of 60 Cold/sec. This stacks with the direct stream and Ice Path's cold sources as well.
  6. OC Flow Rate Expansion Balanced · x2.7 Pressure Gain Rate, +0.8 Flow Rate, x2.25 Pressure Drop Rate

Field notes

Loadout guide

What does +0.8 Flow rate do?

You fire 8.8 ticks per second instead of 8. This represents a slight increase in damage and freezing ability. See the total frost damage section for more info on freezing, but this doesn't increase the freezing power of the weapon's ice path or from cold radiance. In fact, it's kind of bad with cold radiance, which triggers after 1s of continuous fire, since it basically makes it cost 1 more ammo to trigger most of the time. Note that this bonus stacks additively with T3B.

But what about the x2.7 pressure gain (reload speed) and x2.25 pressure drop (clip size) rates?

Taken together, you might think that this would increase the overall time you can spend firing the gun by 2.7/2.25 = 1.2 = 20%. But how true that is depends on how much of your idle time is spent "reloading the clip". If you're firing in short bursts, never fully emptying the clip, you will be able to get 20% more effective shots off with this combination. But if you ever empty the clip, you have to wait 1 second for the regen to kick in, unless you take T2C.

The pressure drop rate penatly is actually really bad, since it kind of affects both initial clip size as well as passive reload speed. If you have low pressure drop rate, you mostly don't need to worry about letting up the trigger to avoid running out of pressure. But the pressure gain rate also has a tiny hidden benefit: if you do fully empty the chamber, you won't be able to fire again until you hit about 1/4 pressure on it. No other OC will let you fire as soon after emptying the chamber as Flow Rate Expansion.

What playstyle does this help with?

T3A multiplies your base x2.7 flow rate by 1.75, for an effective pressure gain rate of x4.72. This means that as long as you remember to take your finger off the trigger every now and then, your pressure will build up nearly instantly. If you take T2B, when you run out of pressure, you have to wait until the meeter is about 1/4 full before you can start firing again. Taking T2B and T3A combined makes it so when you run out of pressure, you only have to wait about 0.1s to start firing again once you run out of pressure. Additionally, that quarter tank you had to wait for gives you just about exactly enough ammo to trigger cold radiance once, which takes 1s of coninuous fire.

Playtesting and thinking about this build has basically taught me just how poweful T1A is as a node. It effectively multiplies your pressure gain rate by 3x, because each bit of pressure you have is worth 3x as much. But, if you ever do run out of pressure, T1A doesn't make you able to fire again any sooner. It will just make it so when you get that 1/4 tank back, which takes the same amount of time, it will last 3x as long.

This OC synergizes poorly with the T1A node, because that node alone usually makes your clip size effectively infinite, even on other overclocks that have a penalty to either pressure gain. On Ice Storm or Tuned Cooler, T1A alone will allow you to take T3B and still feel like you rarely if ever need to let up on the fire, even while freezing tough targets like detonators. Because of the massive x2.25 pressure drop rate penalty with this OC, you still won't be able to freeze tough enemies like bulk detonators in 1 clip even if you take T1A. Instead, the combination of T2C and T3A will make T1A unecessary, by making sure that running out of pressure will never be the thing that kills you.

Mod alternatives

T1B vs T1C: I prefer T1B because there aren't a ton of useful breakpoints hit by T1C, but you will feel T1C especially against mactera and especially if you don't take/use cold radiance. T1C is also better for the ammo efficiency against large targets like detonators where you don't want to get in range of them to trigger cold radiance. A lot of your ammo efficiency in those situations, though, can be from making the ice path effect work for you, especially once the target is getting close to freezing. Enemies won't gain any heat as long as they're not froze yet, and they've taken cold damage in the past half second. The ice path will make that happen if you can keep one underneath big targets when they're about to freeze, and you can keep them in the max slow phase for a bit longer as well.

T5A vs T5B: It took me a bit of time to realize just how much ammo you can save by taking fragile instead of cold radiance. The fact that fragile doesn't quite kill on harder difficulties actually makes it really nice for getting health back with vampire, though you do have to be careful on single player because bosco will gladly steal those final kills from you. I think that T1C + T5A is a completely viable build for this OC, and I usually choose between that and T1B + T5B. Cold radiance increases your effective cooling ability so much vs enemies such as praetorians and oppressors that you don't really need the increased cold from T1C. I actually do really like taking T5A with this OC though, especially to combo with a heavy hitter/plasma burn EPC to temp shock grunts. It makes you much more ammo efficient against hordes, but much worse against things like oppressors that you can normally utilize cold radiance against, unless you temp shock them starting from the burning state and give up any crowd control effects against them. I do not recommend taking anything other than cold radiance in mini mule missions or black box secondaries though, since it can be a huge life saver when you can't leave a small enclosed area. It can be really fun to combine cold radiance with the neruotoxin grenade in those missions - you can keep everything frozen and slowed. Just watch out for oppressors if you do, you won't have the ol' reliable freeze to animation cancelled double axe throw to kill them. They'll go down eventually if you can keep them slowed outside the area you're guarding.

Overall freeze power

The flow rate is 8 ticks per second, at 8 freeze per tick. That's 64 freeze per second, plus 10% from the flow rate increase = 70.4. Cold radience will do 60 freeze after 1 second, but will rarely trigger twice because you shouldn't be holding down m1 long enough. The trail of ice left by the gun does 8 cold per tick every half second, so 16 per second. The path lasts for 3 seconds, so if you place it well it will do up to 48 cold total after you're done firing, and 16 during the 1 second you're holding M1.

Your total freeze power against an enemy in range of cold radience, with a 1 second burst aimed at their feet, is therefore 64 + 70.4 + 60 = 194.4. In this situation, Increase Flow Volume (T3) and Stronger Cooling Unit (T1) will provide a minimal increase in your actual freezing ability (+12.8 with IFV, +8.8 with SCU, and +23.2 with both). Those upgrades are much more impactful in situations where you can't apply either cold radience or the ice path freeze effect, such as vs mactera at the edge of your available range.

The effectiveness of the ice path as a total portion of your freezing poower, especially when you manually slow down the flow rate by triggering in short bursts, is what makes me like T1B more than T1C in almost every build.

Comparison with other Overclocks

I'll compare this to the 2 other overlcocks I think are remotely similar in that they basically make the Cryo Cannon better at freezing, whether or not they make it more damaging.

Improved thermal efficiency

Both of these increase the amount of time you can hold down M1 in some way, but ITE lets you hold it longer. You can empty half your ammo without letting go of the trigger if you use ITE with T1A, but it also kind of makes T1A unnecessary. I kind of think ITE is actually the best cold radiance triggerer, because it has no bonus flow rate, and instead has increased ammo. If you ever do empty the clip with ITE though, it does take a fair amount longer to recover, because it doesn't have any bonus to pressure gain. But T2C is probably unecessary on any ITE build, because it's much easier to play around never emptying the chamber completely. The only slight advantage of FRE, maybe, is that you get to freeze stuff that tiny bit faster from the base flow rate increase and T1B. You don't have quite as much flexibility, holding down M1 as much as you want, if you take T1B and T3B for fast freezing with ITE. But that can definitely work as well if you're careful about watching the pressure gauge on your weapon.

Tuned Cooler

Tuned cooler has no antisynergy with T1A, in fact, T1A makes tuned cooler seem like you can shoot forever and synergizes great with the increased cold. It also lets you take T3B without worry. But getting to 10 freeze per partical is also huge on tuned cooler, since almost every freeze value for enemies in this game is divisble by 10, making that a very useful breakpoint especially vs enemies that won't be affected by ice path. And T1B can be a huge help given the firing delay penalty from TC. Personally, when I play with tuned cooler, I enjoy trying to play around the fire delay, and going for either T1A + T3B, or T1C + T3A. I don't love T1C + T3B because I've been screwed feeling like I couldn't get pressure back in time.

Squad chatter

Comments