Engineer loadout · Season 5 Older patch: made in an earlier patch, so some upgrades may perform differently today.

Roll Control & Armor Break Module

by JACKTHEPROSLEGEND · Updated 18 Aug 2025

Salutes · 1

Weapons & gear

Primary · Submachine Gun

LOK-1 Smart Rifle

Upgrade code:23312

Clean overclock Armor Break Module

  1. T1 · B Expanded Ammo Bags +72 Max Ammo
  2. T2 · C Zoom Lens +10m Lock-On Range
  3. T3 · C Super Blowthrough Rounds +3 Penetrations
  4. T4 · A Shutter Speed Sensor x0.85 Lock-On Time
  5. T5 · B Unstable Lock Mechanism Full Lock adds 20% more Direct Damage to all shots fired during the burst.
  6. OC Armor Break Module Clean · On Full Lock, each bullet does 1250% Armor Breaking.
Secondary · Heavy Weapon

Breach Cutter

Upgrade code:23122

Clean overclock Roll Control

  1. T1 · B High Capacity Magazine +3 Magazine Size
  2. T2 · C Loosened Node Cohesion +1.5 Plasma Beam Width (equipment-terminal units).
  3. T3 · A Quick Deploy -0.2 Plasma Expansion Delay
  4. T4 · B Disruptive Frequency Tuning +100% Stun Chance, 3 sec Stun duration
  5. T5 · B Plasma Trail Leaves behind a Persistent Plasma field that does an average of 20 Fire Damage per second for 4.6 seconds. The Plasma field's width is 2/3 of the beam's width, and extends along the entire length of the beam's path.
  6. OC Roll Control Clean · After the line expands, it will begin rolling at 1200 degrees per second (3.33 full circles/sec). Holding down the trigger after the line leaves the gun allows you to influence the path the spinning projectile takes, similar to the Hurricane Guided Rocket Launcher. On release of the trigger, it will continue flying in a straight line. In addition, +0.5 Projectile Lifetime.

Comments