Stony Rock's Stubby build for Stationary Defense

by avg_nerd on 21/02/2025

Salutes 1

"Stubby" Voltaic SMG

"Stubby" Voltaic SMG icon
+3 Direct Damage
+25% Chance to Electrocute an enemy
+120 Max Ammo
+10 Magazine Size
x0.7 Recoil
+3 Rate of Fire
+3 Direct Damage
+120 Max Ammo
+25% Weakpoint Bonus
+25% Direct Damage dealt to enemies either being Electrocuted or affected by Scout's IFG grenade
+250% Armor Breaking
+20 Magazine Size
Every time the SMG applies its Electrocute DoT, there's a 25% chance that all enemies within a 2.75m radius of the primary target will be electrocuted as well.
x0.6 Base Spread, -25% Max Spread, and -13.33% Spread per Shot
Turret EM Discharge

Shard Diffractor

Shard Diffractor icon
+2 Area Damage
+2 Direct Damage
+100 Total Capacity
+33% Weakpoint Bonus
+0.8m AoE Radius
+50 Charge Capacity
-0.8 Recharge Time
Increases the amount of Direct Damage added as Heat from 25% to 100%
+400% Armor Breaking
When damaging an enemy that is either Electrocuted or affected by an IFG, add an additional +33% Direct and Area Damage as Electric-element.
Killing a medium-or-larger enemy refunds 3 ammo to the current Charge Capacity, prolonging the firing duration. This can only happen once every 0.25 seconds.
All enemies damaged by the AoE have their movespeed slowed by 80% for 1 second.
Overdrive Booster

Platform Gun

Platform Gun icon

LMG Gun Platform

LMG Gun Platform icon

Engineering Suit

Engineering Suit icon

Pickaxe

Pickaxe icon
Proximity Mine
Proximity Mine icon

Loadout Guide

Primary:

T2a and T2b for the stubby can be used interchangeably. Micro-Conductor Add on can be used as well, but I prefer Turret Discharge as it requires less set-up, and it procs the fear effect.

Secondary:

Overdrive Diffractor gives high burst damage for single targets. VIR can also be used for more area denial/DOT. TBH, any of Engi's secondary's synergise with this build, so bring what you like.

Equipment:

Prox mines for additional area denial, but SSGs can also be selected for more CC.

Good to Know:

Lastly, if you use micro-conductors, remember to switch from T3B to T3A on the platform gun.