Engineer loadout · Update 34 Older patch: made in an earlier patch, so some upgrades may perform differently today.

Anti-Elite: Breach Cutter Spinning Death w/ Stun

by MeatShield · Updated 12 Aug 2021

Salutes · 1

Weapons & gear

Secondary · Heavy Weapon

Breach Cutter

Upgrade code:11223

Unstable overclock Spinning Death

  1. T1 · A Prolonged Power Generation +1.5 Projectile Lifetime
  2. T2 · A Expanded Ammo Bags +6 Max Ammo
  3. T3 · B Improved Case Ejector -0.6 Reload Time
  4. T4 · B Disruptive Frequency Tuning +100% Stun Chance, 3 sec Stun duration
  5. T5 · C Triple Split Line Adds a line above and below the primary projectile (multiple lines hitting doesn't increase DPS)
  6. OC Spinning Death Unstable · Instead of flying in a straight line, the projectile now rotates 2 times per second about the Yaw axis. Additionally: x0.05 Projectile Velocity, x0 Impact Damage, x2.5 Projectile Lifetime, +1.5 Plasma Beam Width (equipment-terminal units), x0.24 Beam DPS, x0.65 Max Ammo, and x0.33 Magazine Size

Loadout guide

One of the weapons builds I made for the "Revisiting Elite Enemies" blog post.

This Breach Cutter build is especially well-suited for Elite enemies. While enemies are in contact with the beam, they're slowed by 70%. Additionally, even though the 3 second stun gets reduced to only 0.6 seconds, the Spinning Death overclock tries to re-apply that stun four times per second. Pair both the slow and stunlock with the 7.5 second duration, this will hold Elite enemies in place while chewing through their eHP.

Comments