Have feedback on the new Karl.gg? Tell us what’s working, what’s getting in your way, or what you’d like to see improved on Discord. Please keep loadout posts focused on builds so players can find them easily. Share feedback on Discord

This build may be outdated.

It was made in an earlier patch, so some upgrades may perform differently today.

Scout loadout · Season 5

A Driller's Best Friend [Conductive Thermals + Shaped Shells]

by Alan · Updated 31 Oct 2024

Primary
DRAK-25 Plasma Carbine
Secondary
Jury-Rigged Boomstick
Throwable
Inhibitor-Field Generator
Use this build Salutes · 2

The kit

Weapons & gear

Primary · Assault Rifle

DRAK-25 Plasma Carbine

  1. T1 · B Improved Thermals x0.75 Heat per Shot
  2. T2 · B Increased Particle Density +2 Direct Damage
  3. T3 · A Custom Coil Alignment -70% Horizontal and Vertical Spread
  4. T4 · B Plasma Splash -5 Direct Damage, +5 Area Damage in a 1m radius
  5. T5 · B Thermal Feedback Loop When the Heat Meter is greater than 50%, the Rate of Fire is increased by +5 (up to a maximum of 20 RoF).
  6. OC Conductive Thermals Balanced · Each hit inflicts two stacking Status Effects; one decreases the Fire, Frost, and Electric-element resistances by 5% per stack and the other multiplies the Ignite, Douse, Freeze, and Unfreeze temperatures by x0.95 per stack (max x0.21464 at 30 stacks). In exchange: -3 Damage and +36.67% Heat per Shot.
Secondary · Shotgun

Jury-Rigged Boomstick

  1. T1 · A Expanded Ammo Bags +8 Max Ammo
  2. T2 · A Double Trigger +7.5 Rate of Fire
  3. T3 · C High Capacity Shells +3 Pellets per Shot
  4. T4 · A Super Blowthrough Rounds +3 Penetrations
  5. T5 · C White Phosphorous Shells Convert 50% of Pellet damage to Fire element and add 50% of the Damage per Pellet as Heat which can ignite enemies
  6. OC Shaped Shells Balanced · Reduces Horizontal Base Spread from 35 to 5 and reduces Vertical Base Spread from 10 to 5. In exchange, -4 Max Ammo
Equipment

Grappling Hook

  1. T1 · A Improved Recharger Spend less time waiting and more time swinging
  2. T2 · A Greater Cable Stretch Increased range
  3. T3 · A High Velocity Ejection System Hook shoots out at a higher speed
  4. T4 · B Momentum Temporary movement speed bonus after releasing the Grapling Gun.
Equipment

Flare Gun

  1. T1 · B Thicker Core More core material for a longer burn.
  2. T2 · A Supercharged Feed Mechanism We overclocked your gun. It fires faster. Don't ask, just enjoy. Also probably don't tell Management, please.
  3. T3 · C Magnesium Core A solid magnesium core is added to the flare, increasing how long it can burn.
Throwable

Inhibitor-Field Generator

The IFG - or Inhibitor-Field Generator - is one of the latest inventions of the good people down in R&D. Toss one of these bad boys into a cluster of bugs, and watch them slow right down. Enemies affected by the IFG field also take amplified damage from all sources.

Field notes

Loadout guide

PERKS

Passive: Resupplier, Born Ready, Vampire

Active: Iron Will, Field Medic

Getting this out of the way, this is more of a team support oriented build and much less for Solo Scout play, and a Driller (or a Volatile Bullets Gunner?) in your team is highly recommended. If you want to try to use Conductive Thermals Solo I recommend bringing Fire or Cryo Bolts for the Boltshark instead. This is also based on my usual playstyle as Scout in a team setting, where I usually ignore grunts and kill high priority targets such as Spitters or Mactera and help in taking down Praetorians and Oppressors. If you were expecting a build that kills swarms of Grunts this isn't for you.

DRAK-25 PLASMA CARBINE

Arguably the most interesting Overclock out of Scout's new arsenal this season (Season 5 for any future readers), Conductive Thermals is used for support in dealing with tough targets such as Dreadnoughts, and other tanky enemies such as Praetorians, Oppressors, Bulk Detonators, or even Rival Tech. It helps in freezing or burning these targets much faster which allows for the benefits of the frozen status or the damage bonus burning brings with weapon mods or Overclocks (like Volatile Bullets or T3 Electro Chemical Rounds for the LOK-1), with the neat addition of the Overclock's own damage buff for elemental damage.

There are the obvious negatives for the Overclock however, with the -3 damage penalty. Even with the damage mod it's left at a pitiful 8 damage, even lower than the Drak without any mods. There's also the heating penalty that makes it constantly overheat, which makes it feel unreliable for quickly and reliably killing HVTs like Spitters. You want to kill HVTs as quick as possible as Scout, and Conductive Thermals DRAK-25 does not help with that. At least you'll have an easier time dealing with ranged enemies than Overtuned Particle Accelerator (ayooo).

Even though the downsides of the Overclock can make it daunting, putting Scout in a more support role, I think the benefits when it works can't be understated. trying this build out with a Cyro Driller in an Elimination mission brought insane results. Basically you want to constantly apply the CT debuff on a Dreadnought target, and when it's freezed, throw down an IFG for its damage increase, which basically creates an ungodly amount of math that is able to do a lot of damage to a Dreadnought. A Hiveguard's vulnerable phase only lasted for a second cause of the debuff stack. It's a relatively simple but effective combo.

UPDATE: Apparentaly T4B Plasma Splash stacks the Condustive Thermals damage effect more, so yeah, use that instead of T4A electric.

JURY-RIGGED BOOMSTICK

So since our primary is no longer reliable for taking out high priority targets due to its pitiful damage, we just let our secondary pick up Scout's usual job instead. It's not like Scout needs any crowd control options in a team setting, what are you? A haz 2 player? (Note: I am joking, please don't snipe with with your M1000).

I decided to bring Shaped Shells with the Boomstick to deal with ranged high priority targets such as Spitters or Menaces, almost similar to that of Magnetic Pellet Alignment Warthog. The T5C White Phosphorus Shells mod can also work extremely well with CT, making it even more reliable ranged heater supported by the elemental buff to make targets burn or freeze faster, which possibly makes it ideal for overheating Rival Tech enemies (I should try it on a Nemesis one day).

Another good alternative for the Boomstick is Embedded Detonators Zhukovs or Nishanka Boltshark without any Overclocks or any of its Cleans and Balanced, the normal bolts without any damage mods are enough to one shot Mactera Spawn or Web Spitters in the weakpoint. Obviously Taser Bolts can work very well with CT's effect, increasing DOT. I don't need to mention how well CT works with Fire and Cryo Bolts, right? I still recommend bringing Taser Bolts to serve as HVT killing.

GRENADES

Since this is a build mainly focused on Elimination, IFGs are the best choice for this for debuff stacking. I love Cryo Grenades and you could bring them to help your Driller out with freezing a Dreadnought, but Conductive Thermals make them freeze so fast by a Cryo Driller, it's almost rendundant in a way.

I know what you might be thinking, "If you want to make a Elimination support based build, why not bring Marked for Death instead? It's a more generalist Overclock compared to Conductive Thermals." My answer is, MFD is more for PUBs where teams can sometimes be less coordinated. I recommend checking the build inspector mod to see if Conductive Thermals is worth bringing to the mission (eg: A Gunner bringing Volatile Bullets or if the Driller knows that you should bring fire to Industrial Sabotage AHEM AHEM). Conductiver Thermals arguably do so much damage as well when done right as well. The combo incredibly fun to pull off with how the Dreadnought's vulnerable phases only last for a second, it can make a Cyro Driller's life so much easier as well, and teamwork makes the dream work.

Squad chatter

Comments